LiveCapture 1100 back panel
Item | Indicator, Button, or Connector | Description |
---|---|---|
1 | Serial port | Allows you to connect a serial device to the system. |
2 | iDRAC Enterprise port | Enables you to remotely access iDRAC. iDRAC is very useful for remote management and direct access of the appliance. |
3 | Ethernet ports (2) (The port labeled ‘Gb 1’ is the eth0 management port) | Use the Ethernet ports to connect Local Area Networks (LANs) to the system. |
4 | Full height riser slot | Use the card slots to connect full-height PCIe expansion cards on full height riser. |
5 | Power supply unit (2) | AC 550 W. Both power supplies should be plugged in to power to provide redundancy. |
6 | Ethernet ports (2) | Use the Ethernet ports to connect Local Area Networks (LANs) to the system. |
7 | USB 3.0 port (2) | Use the USB 3.0 port to connect USB devices to the system. These ports are 4-pin, USB 3.0-compliant. |
8 | VGA port | Use the VGA port to connect a display to the system. |
9 | CMA power port | The Cable Management Arm (CMA) power port enables you to connect to the CMA. |
10 | System identification button | The System Identification (ID) button is available on the front and back of the systems. Press the button to identify a system in a rack by turning on the system ID button. You can also use the system ID button to reset iDRAC and to access BIOS using the step through mode. |